Connecting The Wgt624; Connecting The Router - NETGEAR WGT624v1 - 108 Mbps Wireless Firewall Router Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624

Connecting the WGT624

This section provides instructions for connecting the 108 Mbps Wireless Firewall Router
WGT624. Also, the 108 Mbps Wireless Router WGRT624 Resource CD (SW-10027-01) included
with your router contains an animated Installation Assistant to help you through this procedure.

Connecting the Router

There are three steps to connecting your router:
Connect the router to your network
1.
Log in to the router
2.
Connect to the Internet
3.
Follow the steps below to connect your router to your network. You can also refer to the 108 Mbps
Wireless Router WGRT624 Resource CD (SW-10027-01) included with your router which contains
an animated Installation Assistant to help you through this procedure.
1. Connect the wireless router to your network.
Turn off your computer and Cable or DSL Modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to your cable or
b.
DSL modem.
A
Figure 3-1: Disconnect the cable or DSL Modem
Connect the Ethernet cable from your cable or DSL modem to the Internet port (A) on the
c.
WGT624.
3-4
Cable or DSL modem
M-10153-01
Connecting the Router to the Internet