Configuration File Management - NETGEAR WGT624v1 - 108 Mbps Wireless Firewall Router Reference Manual

108 mbps wireless firewall router
Hide thumbs Also See for WGT624v1 - 108 Mbps Wireless Firewall Router:
Table of Contents

Advertisement

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624
From the Main Menu of the browser interface, under the Maintenance heading, select the Router
Upgrade heading to display the menu shown below.
Figure 6-5: Router Upgrade menu
Note: When uploading software to the WGT624 wireless router, it is important not to interrupt the
web browser by closing the window, clicking a link, or loading a new page. If the browser is
interrupted, it may corrupt the software. When the upload is complete, your router will
automatically restart. The upgrade process will typically take about one minute.
To check for new firmware:
Click Check.If the WGT624 finds new firmware is available, follow the on-screen prompts to
1.
download in install the new firmware.
To upload firmware from your hard drive:
In the Router Upgrade menu, click the Browse button and browse to the location of the binary
1.
(.BIN) upgrade file.
Click Upload.
2.
In some cases, you may need to reconfigure the router after upgrading.

Configuration File Management

The configuration settings of the WGT624 wireless router are stored within the router in a
configuration file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the
user's PC, or cleared to factory default settings.
6-6
M-10153-01
Maintenance

Advertisement

Table of Contents
loading

Table of Contents