How To Restrict Wireless Access By Mac Address - NETGEAR WGT624v1 - 108 Mbps Wireless Firewall Router Reference Manual

Note: If you are configuring the firewall from a wireless PC and you change the
firewall's SSID, channel, or security settings, you will lose your wireless connection
when you click on Apply. You must then change the wireless settings of your PC to
match the firewall's new settings.
Configure and test your PCs for wireless connectivity.
8.
Program the wireless adapter of your PCs to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the firewall.
Once your PCs have basic wireless connectivity to the firewall, then you can configure the
advanced wireless security functions of the firewall.

How to Restrict Wireless Access by MAC Address

To restrict access based on MAC addresses, follow these steps:
Log in to the WGT624 firewall at its default LAN address of
1.
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
Note: When configuring the firewall from a wireless PC whose MAC address is not in
the Trusted PC list, if you select Turn Access Control On, you will lose your wireless
connection when you click on Apply. You must then access the wireless router from a
wired PC or from a wireless PC which is on the access control list to make any further
changes.
Click the Wireless Settings link in the main menu of the WGT624 firewall.
2.
Wireless Configuration
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624
M-10153-01
http://192.168.0.1 with its default
4-9