Troubleshooting - Dual XDVD8183N Installation & Owner's Manual

Dvd multimedia receiver with 7” touch screen display
Table of Contents

Advertisement

XDVD8183N

Troubleshooting

Problem
Please connect first
appears in the display
Mobile device will not
connect to the head unit
ERROR! Connect Timeout
appears in the display
Pairing Fail appears in
the display
Mobile device will not
connect to the head unit
automatically
Ring tone can not be
heard through the
speakers
Echo or noise is heard
during a phone call
Call is connected
(but no audio can be
heard through the
speakers)
Call is answered
automatically
Caller ID does not appear
during incoming call
67
OPERATION
Cause
There is no mobile device connected to the head unit
Bluetooth function is not active on the head unit
Bluetooth function is not active on the mobile device
A mobile device is already connected to the head unit
This head unit can only be connected to one device at
a time
The time limit for the pairing mobile device has been
reached
The attempted pairing process has failed
The Connect function is set to Manual. When the
Connect function is set to Manual, the head unit will
not connect to any mobile device automatically
Ring tone volume is turned down
MUTE function is activated on the head unit
Possible road noise or interior interference
Microphone opening on the front panel is obstructed
Audio is routed to the mobile device
Auto Answer function is set to On
The calling mobile device is not set to send the Caller
ID or, the service is not available
Bluetooth
Pair and or connect a mobile device to the head unit as
described on page 69
Activate Bluetooth function as described on page 21
Refer to the owner's manual of your mobile device
Disconnect current mobile device first, then connect
desired mobile device
Pair the mobile device within 120 seconds
Retry the pairing process again
Set Connect function to Auto as described on page 63
Increase the volume of the ring tone using the rotary
encoder during the ringing process
Press MUTE to cancel the mute function and resume
audio
Close all open windows and turn off any fans or A/C
Clear any obstacles in front of microphone opening
Press Audio Transfer to allow audio from the phone to
be heard through the speakers
Set Auto Answer function to Off as described on page 63
Some devices may not communicate or work properly
with this head unit
Action

Advertisement

Table of Contents
loading

Table of Contents