Troubleshooting - Dual XDVD8182 Installation & Owner's Manual

Problem
Unit will not turn on
(no power)
Unit has power
(but no sound)
Unit blows fuse
Unit has audio
(but no video)
No video display
(when in reverse)
DVD does not start playback Physical defect in media
IR remote does not work
Excessive skipping
ERR-DISC appears
on display
Region code error appears
on display
Front panel will not
open/close
Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the
United States and or other countries.
Cause
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
Speaker wires not connected
One or more speaker wires touching each
other or touching chassis ground
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Parking brake safety circuit not connected
Parking brake not applied
Reverse circuit not connected
Vehicle is not in reverse
Rear view set to OFF
Wrong region
Dead battery
Unit is not mounted correctly
Physical defect in media
Focus error or disc is in upside down
Region code error
Front panel obstructed
XDVD8182 OPERATION

Troubleshooting

Action
Check connections for proper voltage (11~16VDC)
Check connection to ground
Replace fuse
Check connections at speakers
Insulate all bare speaker wires from each other and chassis
ground
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Check connections at parking brake
Apply parking brake
Check connections at reverse lamp
Select reverse gear
Set rear view to ON - see page 14 for details
Check media for scratches
Use discs labeled "Region 1" or "All" only.
Replace battery
Check mounting sleeve
Check media for scratches
Press eject or RESET
Use only DVDs labeled "Region 1" or "All" only.
Remove the obstacle and press OPEN again to resume the
monitor open/close sequence.
43