Audio - Dual XD622W Installation & Owner's Manual

XD622W
General Operation
Programmable
Display Priority
Programmable
Clock Priority
Source Audio Memory
6
OPERATION
Press and hold DISP then press TUNE
frequency (tuner mode) or CD track/ elapsed time (CD player
mode) display priority (default). Clock is accessed by
pressing DISP momentarily.
Press and hold DISP then press TUNE
display priority. Radio frequency or CD track/elapsed time is
accessed by pressing DISP momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to turn clock
priority on/off.
Reset Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs. The
RESET button is located behind the faceplate.

Audio

Press rotary encoder to select between Volume (default),
Bass, Treble, Balance & Fader.
Bass Press rotary encoder until BASS appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Treble Press rotary encoder until TRE appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Balance Press rotary encoder until BAL appears
Rotate encoder left/right to adjust
(L12-0-R12) 00 represents equal balance.
Fader Press rotary encoder until FAD appears
Rotate encoder left/right to adjust
(F12-0-R12) 00 represents equal fader.
Individual Bass and Treble settings are retained in memory
for AM, FM, Weatherband, CD and AUX modes.
to select radio
to select clock