Installation Instructions - LG WM2442HW Owner's Manual

INSTALLATION INSTRUCTIONS :::
Install or store unit where it will not be exposed to temperatures below ff'eezing or
exposed In outside weather ¢onditious_
Properly ground washer to cmfform with all governing codes and errdinanceso
]_) reduce tlne risk or elecffic shock_ do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on n carpeted f[ooro
In countries wlnere there are areas which may be suhject to in[eslalion by cockroaches or other vermin, pay
parlicular attention to keeping the appliance and ils surroundings in clean condition at all times,
Any damage which may be cause by cuckroaches or other vermin will not be c_wered by the appliance guaran|ee.
= Shipping bolts
The appliance is fitted with shipping bolts to prevent internal damage during transport
,. Removing shipping bolts
1o To prevent internal damage during transport,
4 locking bolts are installed Before operating
the washer, remove the bolts and braces
• tf they are not removed, it may cause severe
vibration, noise, and malfunction,
3_Take out the 4 bolts and braces by twisting
the braces slightly. Keep the 4 bolts, braces
and the wrench for future use,
• Whenever the appliance is transported, the
shipping bolts and braces must be replaced
2, Unscrew the 4 bolts with the wrench supplied
4, Close the holes with the caps supplied