LG WM2442HW Owner's Manual page 16

HOW TO USE THE WASHER ....
1, Prewash
• Use this option for loads that need pretreatment
Adds 16 minutes prewash and drain
. When using Prewash option, do net use liquid
detergent in the Main Wash Compartment.
Use powdered for the main wash.
2oStain cycle
-Adds time to the wash and rinse for better stain
removal
• Automatically provides a rinse
3. Quick Cycle
i i i ii ii ii Hll,lll H ,,
• The Quick cycle offers a quick cycle time
. Suggested uses include freshening new_y
purchased clothes, or clothing that has been
packed away
4. Extra Rinse
• This option provides an additional rinse
• Use this option to ensure the removal of detergent
or bleach residue from garments
5. Rinse+Spin
• Use this option to rinse and then spin
6. Delay Wash
.................................. iiiiii
• A!lows the start of any cycte to be detayed for
1_12 (9) hours
• Choose the wash cycle for your load, and then
press the Delay Wash button once for one hour or
press the button again to increase the delay wash
time up to 12 (9) hours in one hour increments
pT,_.,J, h f_.9 3 IFJ3
"t_[k30_.C, LO¢_
• Use this option to prevent unwanted use of the
washer Press and hold DELAY WASH button for 3
seconds to lock/unlock control
• When Chffd lock is set, _
EL
"bIinks and at[ buttons
are disabled except the Power button
You can lock the washer while it is operating
• Lights whenever the door of the washer is locked
• The door can be unlocked by pressing the
StarttPause button to stop the washer
NO'rE: Ifthe waler temperature or the level is too
high, the duet cannot he unh)cked.
De not try to force the deer open when
DOOR LOCKED lights on,
STATUSINDICATOR
• These lightsshow elapsed time of the cycle the
washer is operating
EST.TIME REMAINING
• This display shows:
a) the estimated time remaining in the cycle when
operating,
b) the error code when an error has been
detected
START/PAUSE
• Use thisbutton to start/stop the washer
POWER
• Use this button to turn the Power On!Off
16