INSTALLATION INSTRUCTIONS
WAR
NING
1. Clothes dryer installation must be performed by a
2. Install the clothes dryer according to the manufacturer's
3. To reduce the risk of severe injury or death, follow all installation
4. Do not install a clothes dryer with flexible plastic venting materials.
SAVE THESE INSTRUCTIONS
Tools and materials required
•
Phillips-Head and flathead screwdrivers
•
Channel-lock adjustable pilers
•
1/2-inch open-end wrench
•
Carpenter's level
•
Measuring tape (12ft. min.)
•
Duct tape
•
Rigid or flexible metal 4 inch (102cm) duct
•
Vent hood
Risk of Fire:
qualified installer.
instructions and local codes.
instructions.
If flexible metal (foil type) duct is installed, it must be of a specific
type identified by the appliance manufacturer as suitable for use
with clothes dryers. Flexible venting materials are known to collapse,
be easily crushed, and trap lint. These conditions will obstruct
clothes dryer airflow and increase the risk of fire.
English
4