Basic Operation; Turning Your Dreambox On And Off - DREAM MULTIMEDIA DREAMBOX DM 800 HD PVR User Manual

U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
4.

Basic operation

4.1

Turning your Dreambox on and off

Use the Power-Button to turn your Dreambox on and off.
To put your Dreambox into Standby-Mode either press the Power-Button on your remote
control or directly on your Dreambox. The current time will be shown in the Dreambox's
OLED-Display.
Pressing the Power-Button for three seconds saves all settings and prepares your
Dreambox for disconnection from power.
Please wait for a note on the screen telling you that you can now disconnect your Dreambox
from power.
Another way to achieve the same thing is to access the main OSD menu and selecting the
"Standby/Restart" option. After that select the "Deep Standby" option and press the OK-
Button.
Alternatively you can press the Power-Button on your Dreambox for 5 seconds. You have to
make sure that no OSD menu is visible on the screen before you do so.
Note
Please note that any recording timers will not be executed if your Dreambox is
disconnected from power.
This is the Standby / Restart menu.
Navigate to the desired option and
confirm by pressing the OK-Button.
Standby:
Puts your Dreambox into Standby mode.
Restart:
Your Dreambox will be rebooted.
Deep Standby:
Saves all settings and enables you to disconnect
your Dreambox from power.
- 25 -