DREAM MULTIMEDIA Dreambox DM7025 User Manual page 48

U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
Put the hard disk cage back into the Dreambox and connect the hard disk power cord
and IDE cable to the hard disk. Please be careful not to lay the power cord too close to the power
supply. Screw the two screws back onto the hard disk cage.
Slide the cover from the rear back onto the device..
Watch for the small plastic clips shown in the picture above. The must not overlap when you slide
the cover back on!
Screw the two screws on each side and five screws on the rear back into place.
Reattach all connector to your Dreambox. Attach the power cord as last.
- 48 -