Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003 - Tcp/Ip) - Ricoh Aficio 1027 Safety Information Manual

Windows Configuration
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003 - TCP/IP)
1
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer attached to this computer.], and then click [Next >].
G
Click [Create a new port:].
H
Click [DeskTop Binder-SmartDeviceMonitor], and then click [Next >].
I
Click [TCP/IP], and then click [Search].
A list of printers using TCP/IP appears.
J
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a machine not listed here, click [Specify Address], and then enter the IP address
or host name of the machine.
K
Check that the name of the machine whose driver you want to install is se-
lected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Specify whether or not to print a test page, and then click [Next >].
N
Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe"on the CD-ROM root directory.
10