Printer Configuration - Ricoh C220N - Aficio SP Color Laser Printer Software Manual

Printer Configuration

You can use the [Printer Configuration] dialog box to change the current printer set-
tings. To display the [Printer Configuration] dialog box and change printer settings,
on the [User Tools] tab, click [Printer Configuration].
Important
❒ The [Printer Configuration] is disabled when the printer is not in the ready state
or power save mode.
You can use the [Printer Configuration] dialog box to change the settings of:
• printers,
• input trays,
• paper loaded in input trays,
• network protocol, and
• factory-set defaults.
Reference
For details about each item you can specify on the [Printer Configuration] dialog
box, see Smart Organizing MonitorHelp.
About menu and mode
There are two modes you can use to access the [Printer Configuration] dialog box:
administrator mode and general users mode.
Available tabs in the [Printer Configuration] dialog box differ depending on the
mode you are in.
❖ Administrator
In the [Access Code] dialog box, enter an access code.
All tabs in the [Printer Configuration] dialog box are available.
❖ General users
Only the [Paper Input] tab is available.
Changing the paper settings
On the [Paper Input] tab, you can change paper size and other paper settings.
• Tray 1: Size
The following sizes are available:
A4 (210 x 297 mm), B5 JIS (182 x 257 mm), A5 (148 x 210 mm), B6 JIS (128 x 182
mm), A6 (105 x 148 mm), 8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2, 7 1/4 x 10 1/2,
8 x 13, 8 1/2 x 13, 8 1/4 x 13, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2, C5 Env, C6 Env, DL
Env, 16K, Custom Paper Size
Using Smart Organizing Monitor
4
41