Advertisement
If more hand clearance is required, remove the air
cleaner assembly as follows:
1.
2.
3.
4.
Remove the air duct clamp and separate the duct
from the air cleaner cover.
Remove the air cleaner cover and detach the
electrical connector.
Tilt and pull the cover toward the engine to
disengage it from the assembly.
Remove the filter.
Slide the air cleaner assembly toward the engine to
disengage and remove it.
To reinstall the air cleaner assembly, slide the base
sections into their former positions. Install the filter and
replace the cover. Reattach the electrical connector and
air duct, and tighten the clamp.
Turn the bulb socket
1/4 turn toward the center
of the engine compartment,
while pressing it firmly.
Remove the wire connector
from the bulb by lifting the
lock tab and pulling it away
from the plastic base.
To reassemble, attach the wire connector (A) to the
plastic base making sure the lock tab (B) is over the
lock (C). Install the bulb by putting the small tab (D)
into the small notch in the lamp (E). Turn the bulb
socket 1/4 turn making sure the tab is properly
engaged in the panel
slot.
Advertisement
