Advertisement
Balance: The control behind the upper knob allows you
to balance the sound between the right and left speakers.
Balance is graphically displayed.
Lower Knob: The lower knob does the following:
Turn the lower knob
to
tune radio stations. If you
hold the
TUNE
knob in the tune position, it will
begin to tune rapidly.
Push the lower knob to get AM, FM1 or FM2. Note
the graphic display.
The control behind the lower knob fades the sound
between the front and rear speakers. The balance
between speakers is graphically displayed.
Finding a Station
4 SEEK b: Press SEEK to search for the next lower or
higher station and stop.
SCAN: When SCAN is pressed, the radio will go to the
next station, pause and keep scanning until you press
SCAN again.
RCL: Press RCL to change the display between the
clock and the radio station frequency when the radio is
on. To display the time with the ignition off, press RCL.
Presets: The five (1-5) pushbuttons can be used to
preset up to 15 radio stations (five
AM,
five FM1 and
five FM2 stations).
1. Tune in the desired station.
2. Push SET.
3. Within five seconds, push one of the five
pushbuttons. Whenever you push that button, the
preset station will return.
4. Repeat these steps for each pushbutton.
Setting the Tone
A
BASS
v:
Press BASS to increase or decrease bass
tones. For the BASS preset setting, press the center of
the control.
A
TREB
v:
Press TREB to increase or decrease treble
tones. Press the center of the TREB control for the
preset level.
Setting the Clock
1. Push SET with the ignition on and the radio off.
2. Within five seconds, push and hold SCAN until the
3. Press and hold SEEK
4 or b until the correct minute
correct hour appears.
appears.
3-9
Advertisement
