Advertisement
Raise or lower the entire seat by holding the whole
control up or down.
Memory Seat and Mirrors (Option)
Move the seat forward or back by holding the control
to the front or back.
Power Lumbar (Option)
If you have this option, the driver's seatback lumbar
support can be adjusted by moving the single switch
located on the side of the seat. To increase or decrease
support, hold the switch forward or rearward.
To set your memory seat and mirrors:
1. Adjust the driver's seat to your desired position.
Adjust both outside mirrors to suit you. See
"Mirrors" in the Index.
2. Press the SET button and then press the 1 or 2 side
of the MEMORY switch within five seconds. You
will hear one beep when you press the SET button
and two beeps when you press the MEMORY button
to confirm that the mirror and seat positions are
entered into memory,
1-2
Advertisement
