Service And User Passwords - ACR Electronics NAUTICAST AIS INLAND Manual

1.5

Service and User Passwords

WARNING: It is very important that the Service password not be lost. The default
password from the factory is mentioned on your AIS display at the protection foil. (see Appendix
7.3 for password information). Keeping the password in a second location may be wise.
Memorizing the password is best. If you lose this password, you cannot make any further
configuration changes: Access to the AIS is blocked. Another master key is not available and the
unit would have to be returned to the ACR Service centre. This service is not free of charge.
Once you have entered the system, please change the default password to your own passwords,
for both levels of access. Use different passwords for the different security levels. Your passwords
must meet the following criteria:
Minimum of six (6) characters, maximum of eight (8) characters
Letters must be in UPPER CASE
Acceptable characters are the A-Z alphabet and 0- 9 digits
Password may contain both letters and numbers
The User Password can be reset in the service configuration menu by entering the Service
Configuration menu and creating a new password.
Changing the Service Password
Select "Service Configuration" from the Main Menu with the cursor button [Up] & [Down] or press
Number 6 on the keyboard.
The password query field appears. Input default Service Password and press M5 [Enter].
N 1
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
Select Submenu 1 "Change Service Password" with cursor button [Up] & [Down] by pressing
Number 1 on the keyboard.
Y1-03-0211G
o o
24' E 0 17' |1>0.10|2>1.30|3>1.80nm
Service password protected!
Please enter service password:
| Enter | | | Exit
13