Table of Contents
Advertisement
Batteries
"The handset's
Before you first used the handset, you should have left it
on the base unit or charger pod for up to 15 hours to
battery pack is
charge the batteries fully.
running low
within an
You may need to replace the batteries (see overleaf).
hour or two."
Clean the battery charging contacts with a dry cloth.
Check the connections between the base unit and the
mains power socket.
"I try to
You need to replace the batteries. To find out how to
recharge the
obtain replacements, call the
batteries, but I
Department on 0845 345 9677, between 9.00 am and
still get a
5.00 pm, Monday to Friday.
warning that
Dispose of used batteries safely — never burn them,
they are low."
or put them where they could get punctured.
DON'T use non-rechargeable batteries in your
Symphony
2600
— they may burst, causing damage.
If the fault persists ...
Disconnect all other instruments connected to the
same line as the Symphony 2600 and see whether you
can make a call.
Disconnect the base unit from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line. Contact the service provider (the BT
engineers on 151, or your cable company).
If you still cannot identify the cause of the problem,
contact the
Binatone Help Line
50
http://www.binatoneonline.com/
Troubleshooting
Binatone Service
on 0845 345 9677 .
Advertisement
Table of Contents
