Binatone SYMPHONY 2600 User Manual page 52

Table of Contents

Advertisement

Troubleshooting
Check that the Send and Receive phone numbers in
your Symphony 2600 have not been accidentally
changed. Use the steps listed on page
numbers, and correct them if necessary —
Send: 1470P1709400;
Terminal: 9
Is your telephone line supplied by Telewest or NTL? In
some areas, lines supplied by these companies do not
support the BT SMS service.
If you route your calls through a different service
provider from the one which supplies your line, it's
possible that this could cause problems. Contact the
Binatone Help Line for advice.
"I can't receive
If there's a problem with receiving text messages on
text messages."
your phone, they will arrive as spoken messages — the
BT Message Centre will call you and you'll be told how
to listen to your messages. Here's what to do:
1
Check that the Receive phone number in your
Symphony 2600 has not been accidentally changed. Use
the steps listed on page to check the number, and
correct it if necessary. It should be 080058752 and the
Terminal number should be 9.
2
If you're sure the Receive number and Terminal number
are correct, try this: write a text message with just one
Register
word —
. Send the message to the number
00000 (five zeroes).
3
A short time later, you should receive a text message
from the Message Centre. You'll then be able to receive
text messages as normal.
Binatone Help Line: 0845 345 9677
31
to check the
Receive: 080058752
49
(Local Call rate)

Advertisement

Table of Contents
loading

Table of Contents