Table of Contents
Advertisement
Handset registration
You don't need to register any handsets which were
!
supplied as part of the system with your base unit —
they are already registered. But if you've bought any
extra handsets separately, you'll need to register them.
To check whether a handset is already registered, make
sure mains power to the base unit is switched on
and the handset is within range. The handset's display
should show its name
(default
If the display constantly shows
to register the handset.
Each handset can be registered to up to four base
units, which have numbers 1 to 4.
1
To re-register
On the base unit, press and hold the
or to register a
HANDSET LOCATOR button until you hear
new handset
Registration tone (repeated 'beeps')
You now have 60 seconds to register the
handset.
2
On the handset, press the left Soft button
Menu
, then press the
Register
to
3
Press the left Soft button
u The display shows a list of base units. If any
of these numbers with special color, the handset
is already registered to that base unit.
4
Move the highlight to
left Soft button
u The display shows
5
Key in the base unit's PIN code (default 0000)
If the base unit's PIN code has been changed
from 0000 (see page
the current PIN code.
28
http://www.binatoneonline.com/
Binatone
) and number.
Searching
, you need
or
button to scroll
Select
BASE: 1
then press the
Select
PIN:
55
), you'll need to know
continued overleaf ...
Advertisement
Table of Contents
