&+$37(5 ',6$66(0%/< $1' 5($66(0%/<
3.6
DX Feed ASSY
(1) Close the rear cover and remove the DX feed ASSY from the printer.
(2) Remove the bind M3x4 screw to remove the ground wire cover and the ground wire from
the paper guide upper ASSY, and then remove the ground wire from the ground wire
cover.
(3) Remove the bind B M3x7.5 Taptite shoulder screw, the washer and the bind B M3x8
Taptite screw to remove the paper guide upper ASSY from the DX feed ASSY.
Paper guide upper ASSY
Ground wire cover
Ground wire
DX feed ASSY
Rear cover
DX feed ASSY
Fig. 4-26
Bind M3x4
Fig. 4-27
4-16
Taptite,bind B M3x8
Shoulder Taptite,
bind B M3x7.5A