3.4
Network Board (For HL-1670N only)
(1) Open the access cover by sliding it to the backward.
(2) Loosen the two bind S M3x8 Taptite screws to remove the PCB access plate.
Access cover
(3) Remove the two bind S M3x8 Taptite screws to remove the network board cover plate.
(4) Disconnect the connector connected with the main PCB and remove the network board.
Printer
Network board
&+$37(5 ',6$66(0%/< $1' 5($66(0%/<
PCB access plate
Fig. 4-16
Fig. 4-17
4-11
Taptite, bind S M3x8
Printer
Taptite, bind S M3x8
Main PCB