Brother hl 1650 - B/W Laser Printer Service Manual page 116

&+$37(5  ',6$66(0%/< $1' 5($66(0%/<
(7) Remove the bind B M3x8 Taptite screw from the guide plate stopper and remove the left
guide spring 2.
(8) Remove the side regist guide from the DX feed ASSY by releasing the hook at the bottom
side of the ASSY using a pair of long nose pliers.
NOTE:
"ERROR 41" may occur if the left guide springs are not fitted correctly. See
'Service Calls' in CHAPTER 6
(9) Remove the left guide plate from the DX feed ASSY while pushing down the DX paper
actuator forward and then remove the DX feed roller ASSY.
for more information on "ERROR 41".
DX feed ASSY
DX feed roller ASSY
Taptite, bind B M3x8
Guide plate stopper
DX feed ASSY (Back side)
Left guide springs 2
2
1
Fig. 4-30
DX paper actuator
Left guide plate
Fig. 4-31
4-18
subsection 2.2
(hook)
Side regist guide
DX feed ASSY