Epson ActionLaser 1000 User Manual page 53

New Level 1 items
RECOVER JAM
Determines whether a page is reprinted after a paper jam is
cleared. If ON is selected and a paper jam occurs, the page is
reprinted after the jam is cleared. If RECOVER JAM is OFF, the
jammed page is not automatically reprinted. Turning off
RECOVER JAM can sometimes speed the printing of complex
pages.
ERR SHEET
Specifies whether the printer prints an EpsonScript error
message when an error occurs. If ERR SHEET is OFF, the error
message is displayed in the control panel but is not printed. If
ERR SHEET is ON, an error sheet is printed when the error
occurs. This feature can be convenient for programmers using a
non-bidirectional parallel interface.
New SYSTEM CONFIG menu
The SYSTEM CONFIG menu has been modified as follows:
The FULL PRINT, MEMORY LEFT, LOAD MACRO, SAVE
MACRO, DELETE MACRO, and PowerOn MACRO items
have been deleted.
The PRINT MODE, MULTI GRAY, SAVE LEVEL 1, and
RESET LEVEL 1 items have been added. These items are
described below.
ON (default), OFF
ON, OFF (default)
EpsonScript SelecType
Settings 5-3