Epson ActionLaser 1000 User Manual page 49

The Encoding option enables you to save a PostScript
document as Binary (default) or ASCII. Use Binary (default)
to reduce the quantity of data; use ASCII if you plan to later
edit the document.
Printer Prep
The Printer Prep pop-up allows you to choose Temporary
(default), None, Permanent, and Interrogate.
Permanent saves the prepared settings so that the driver
does not perform the preparation for the next printing.
Temporary does not save the prepared settings. The driver
must re-prepare the settings for the next print job.
Interrogate specifies that the printer driver query the
printer whether preparation is needed. Preparation is done
only if the printer specifies that it be done. The prepared
settings are lost after printing.
When None is selected, the driver assumes that the printer
is already prepared.
If you are using AppleTalk, the recommended setting is
Permanent for the first job and None for all following
print jobs.
If not all users are using the EpsonScript driver, set this
option to Permanent; do not select Interrogate.
Paper From
Selects the paper source from one of the following:
Automatic (default), Custom, Use SelecType's PAGESIZE,
Standard Bin, Optional Lower Cassette, and Manual
Feed. The actual option you see depends on your printer.
EpsonScript Driver Print Settings
3-13