Epson ActionLaser 1000 User Manual page 43

Print Patterns as Gray (/As Colors)
This check box allows you to send bitmap patterns to the
printer as grayscale or colors so the printer can print them
using its own grayscale patterns. The A
appears only if you have a PPD file for a color printer.
Some bitmap graphic images simulate grayscale or color by
using black and white patterns to represent shades of gray
or color. However, if the printer does not recognize the
patterns as representing grayscale or color, it will print the
pattern and not convert it to grayscale or color.
Smart Underlining
When selected, this item breaks underlining around the
descenders in your document. By default, underlining
crosses the descenders. You can confirm the setting by
viewing the sample graphic in the dialog box.
Precision Bitmaps
When the Precision Bitmap check box is selected, images
are printed at a multiple of 75 dpi.
Images are displayed on Macintosh computers at 72 dpi;
however, most EpsonScript and PostScript printers print
images in multiples of 75 dpi. During the transformation of
72-dpi screen data to print data, some image quality might
be lost. If you select Precision Bitmaps, the screen data is
converted to a multiple of 75 and then printed, preserving
the quality of the image, though reducing the size of the
image by approximately 4%.
Note:
For the options below, Printer's Default uses the setting made in
SelecType.
EpsonScript Driver Print Settings
Colors item
S
3-7