Epson ActionLaser 1000 User Manual page 15
User manual - epsonscript level ii
Hide thumbs
Also See for ActionLaser 1000:
- Setup manual (18 pages) ,
- Paper and paper delivery (11 pages) ,
- Product support bulletin (8 pages)
Table of Contents
Advertisement
After you remove the controller board, do the following:
1. Hold the EpsonScript board with the
CN1 connector facing
down and insert it into the CN3 connector on the controller
board as shown below.
2. Press the EpsonScript board in firmly until it stops secure the
EpsonScript board with the screws that come with it.
1-4 Setting Up
Advertisement
Table of Contents
