To Shuttle Between Two Calls; To Set Up A Three-Way Conference; To End The Conference - iDect X2 User Manual

Color profile: Disabled
Composite Default screen
To shuttle When you have made or answered an outside
between two call and then made an intercom call, you can
calls shuttle from one to the other, like this:
◗
Press and hold the INT/# button for one
second to speak to each in turn, putting the
other on hold
You can transfer the outside call to the other
handset by pressing HANG UP while you're
connected to the intercom call
If you press HANG UP while you're connected
to the outside call, you'll disconnect it.
To set up a 1 Make or answer an outside call
three-way
2 Press and hold the INT/# button to start
conference
intercom mode then key in the number of
the other handset
è
The outside call is put on hold and the other
handset rings.
When the other user answers:
3 Press the INT/# button for one second
Use the BACK/MUTE key to turn off the
handset microphone and the á or â button
to adjust the volume.
To end the
conference
◗
Press the HANG UP button
è
You will drop out of the conference call,
leaving the other user connected to the outside
call.
Using a multi-handset system
27