To Shuttle Between Two Calls; To Set Up A Three-Way Conference - iDect X1i System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
To shuttle When you have made or answered an outside
between two call and then made an intercom call, you can
calls shuttle from one to the other, like this:
◗
Press and hold the INT/# button for one
second to speak to each in turn, putting the
other on hold
You can transfer the outside call to the other
handset by pressing HANG UP while you're
connected to the intercom call
If you press HANG UP while you're connected
to the outside call, you'll disconnect it.
To set up a 1 Make or answer an outside call
three-way
2 Press and hold the INT/# button then use
conference
the á or â button to go to the handset
number (or press Ø to call all other handsets)
è
The outside call is put on hold and the other
handset rings.
When the other user answers:
Press the Ø button for two seconds
3
To end the EITHER
conference ◗
Press the # button for one second
è
You stay connected to the outside call and
the intercom call is put on hold*. Provided the
other user hasn't hung up, you can bring
her/him back into the conference by pressing
the # button again.
OR, to drop out of the conference call, leaving
the other user connected to the outside call:
◗
Press the HANG UP button
* You can only do this if you were the one who set up
the conference. If you were brought into the conference
by the other user and you press the # button at this
point, you'll cut off the conference call.
Help Line: 0845 345 9677
(Local Call rate)
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:00
Using a multi-handset system
25