Symbols On The Display - iDect X2 User Manual

Symbols on the display

18:44 12/08
The time and date
JANE 1
The handset's name
02:21
(the default is HANDSET )
Call Duration.
What the symbols mean
Signal This lashes while the handset is trying to establish a link f
base unit If flashes while you're on a call, move closer to the .
level
base unit .
Appears when you have missed incoming calls (if you
New call
subscribe to Caller Display).
Intercom Flashes while your handset is ringing for an intercom call, and
comes on steadily when the call's connected.
call
Memory/
Comes on when you're storing numbers in memory, and when
store
you're making calls to stored numbers.
Ringer Appears when the ringer volume is set to zero.
Silenced
Redial
Appears when you are using last number redial
Keypad Lock Appears when the keypad is locked.
When this shows 'nearly empty' (
Battery
the base unit or charger pod to charge the batteries.
charge
While the batteries are being charged, the symbol blinks.
Appears when you have a connection to the outside line.
Phone
Flashes when there's an incoming call to be answered
(even if the ringer is turned off).
TAM
Appears when a new VMW1 is received.
Speakerphone Appears when the speakerphone is turned on.
The handset's number (if you
have more than one handset on
your iDECT X2 system)
to the
), put the handset on
1