Ulead VIDEO STUDIO 9 User Manual page 81

The procedure below shows an example of how to first zoom in on a
subject, then pan and zoom out to show the whole image.
To apply Pan & Zoom:
1. Drag the Start key frame, represented by the left crosshair in
the Image Window, to the subject you want to focus.
2. Zoom in on the subject by minimizing the marquee box or by
increasing the Zoom ratio.
3. Set the Pause time to the amount of time to stay on the subject
before panning and zooming out.
4. Click the End tab. Drag the End key frame, represented by the
right crosshair in the Image Window, to the center of the image.
Zoom out to show the whole image by enlarging the marquee
box or by setting the Zoom ratio to the lowest value.
ULEAD VIDEOSTUDIO USER GUIDE
81