Ulead VIDEO STUDIO 9 User Manual page 17

Line-in cable for TV tuner
card
Line-in cable for high-end
TV capture card
Checking the hardware setup
After connecting your analog source to the capture or tuner card,
check if the card is detected by your Windows system.
To check if the capture or tuner card is detected:
1. If you are using a video device such as a camcorder as your
source, insert your videotape into the video device and switch it
on. Make sure it is in the playback mode (usually named VTR or
VCR). See your machine's manual for specific instructions.
ULEAD VIDEOSTUDIO USER GUIDE
TV tuner connection
High-end TV capture card connection
17