Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual page 234

4.22 LCD unit / FL inverter
6. Disconnect the LCD cable and remove the LCD unit.
Installing a LCD unit / FL inverter
To install a LCD unit and FL inverter, perform the following procedure. (See Figure 4-33 to
4-37.)
1. Connect the LCD cable to the connector on the back of the LCD and fix with the
glass tape.
2. Put the LCD unit on the LCD with the guide hole into the guide and fix with the
following screws.
3. Connect the two cables to the connector of the FL inverter.
4. Set the FL inverter and fix it with the following screw.
5. Mount the display mask and push to lock all the latches.
6. Fix the display mask with the following screws and stick the mask seals.
PORTEGE A100 Maintenance Manual (960-460)
LCD cable
Soft cloth
Figure 4-37 Removing the LCD unit
M2 4Z BIND screw
M2 4Z BIND screw
M2 4Z BIND screw
4 Replacement Procedures
Glass tape
LCD
x4
x1
x2
4-47