Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual page 254

4.25 Fluorescent lamp
5. Fixing PCB and bezel with screws
<Procedure>
1) Fix the right side ( 2 points, viewing from the back) with a screw in order of • and
‚.
2) Fix the left side ( 2 points, viewing from the back) with a screw in order of ƒ and
„.
Caution: 1. Keep the order of screwing. No floating shall be.
2. The torque of screw driving shall be 0.1666N/m (1.7Kgf.cm).
3. Use a Phillips screwdriver with the bit of No.
Figure 4-54 Replacing TDM fluorescent lamp(11)
PORTEGE A100 Maintenance Manual (960-460)
4 Replacement Procedures
4-67