LCD Display Menu
LCD Display Menu
LCD Display Menu
LCD Display Menu
LCD Display Menu
Your new Digital Firesafe features an LCD display to assist in programming
and operating your safe. A menu of the codes is as follows:
Step 3.
Step 3.
Programming a Passcode
Programming a Passcode
Step 3.
Step 3.
Step 3.
Programming a Passcode
Programming a Passcode
Programming a Passcode
Use the digital keypad to program your own 2 to 8
digit passcode. You may choose or change your
personal passcode at any time by following these steps:
1. Locate the memory button marked on the
inside of the door.
2. Using a pen or other blunt tip, quickly push
and release the memory button.
3.
After you hear a
"OPEN" and you may begin entering your personal
code (from 2 to 8 numbers) followed by the # # # # #
button.
4. Next, you will hear a longer
display will read "CODE", indicating that your
personal code has been successfully programmed
and can now be used to open your safe.
Important:
Important: SECURITY LOCKOUT PERIODS
Important:
Important:
Important:
For added security, the safe will automatically "Lockout"
entry for 5 minutes after three attempts to open with an
invalid passcode. After three more invalid attempts within
this time period, a one-hour "lockout" period will begin.
During these "Lockout" periods, entry
using the emergency override key.
Home and Office Security Safes
Programming A Passcode
Programming A Passcode
Programming A Passcode
Programming A Passcode
Programming A Passcode
Ready to enter your passcode
Passcode successfully programmed
Correct passcode entered
Incorrect passcode entered
Batteries ("AA") must be replaced
"beep
beep
beep", the LCD display will read
beep
beep
SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
"beep
beep
beep"
beep
and the LCD
beep
MUST BE MADE
MUST BE MADE
MUST BE MADE
MUST BE MADE
MUST BE MADE
LCD
DISPLAY
MEMORY
BUTTON
3 3 3 3 3