Installation Procedure - Honeywell 2054D - 1 Hour Steel Fire Safe Operations & Installation Manual

Additional Features: Bolt-Down Kit Additional Features: Bolt-Down Kit Additional Features: Bolt-Down Kit
Additional Features: Bolt-Down Kit Additional Features: Bolt-Down Kit

Installation Procedure

Installation Procedure Installation Procedure
Installation Procedure Installation Procedure
1. Choose a mounting location that is easily
accessible from both above and below.
2. Carefully position the template on the location
that you want to mount the safe.
3. Create the guide marks by pressing a sharp
tool through the circles at the four corners of
the template and into the mounting location.
4. Drill a hole (the diameter of the break-off bolt
shaft) through each guide mark.
Important: Important: Important: DON'T DRILL SAFE
Important: Important:
Do not drill into the feet, bottom or
any other part of safe! Doing so will
ELIMINATE THE FIRE PROTECTION ELIMINATE THE FIRE PROTECTION ELIMINATE THE FIRE PROTECTION
ELIMINATE THE FIRE PROTECTION ELIMINATE THE FIRE PROTECTION
that has been designed into your safe
and invalidate all stated warranties.
5. Before attaching the safe, you should check
carefully that the 4 holes you have drilled
match up precisely with the holes that have
been pre-drilled in the bottom of the safe.
Note: On certain models, It may be necessary
to remove the rubber foot pads that are
screwed into the bolt-down holes at the
factory.
6. Once you have confirmed that the holes are
aligned and in the location you desire, install
the break-off bolts and washers from
underneath the mounting location (through
the furniture or shelf), and into the pre-drilled
holes in the safe.
7. Turn bolts until the screw heads break off.
Home and Office Security Safes
DON'T DRILL SAFE DON'T DRILL SAFE DON'T DRILL SAFE
DON'T DRILL SAFE
Models 2054D (only) Models 2054D (only)
Models 2054D (only) Models 2054D (only) Models 2054D (only)
7 7 7 7 7