Programming Preparation; Installing Batteries - Honeywell 2054D - 1 Hour Steel Fire Safe Operations & Installation Manual

One-hour digital firesafes with key lock
Table of Contents

Advertisement

Programming Preparation

Programming Preparation
Programming Preparation
Programming Preparation
Programming Preparation
Step 1.
Step 1.
Step 1.

Installing Batteries

Installing Batteries
Installing Batteries
Step 1.
Step 1.
Installing Batteries
Installing Batteries
The digital keypad is powered by 4 "AA" batteries which
must be installed before you can begin programming
your personal code. For your convenience, we have
provided you with 4 "AA" batteries.
depending on use, we recommend replacing the
batteries at least once a year.
1. Locate battery compartment to the right of the
digital keypad.
2. To open the compartment, press firmly in on the
battery cover and slide it to the right for removal.
3. Install 4 new "AA" batteries in the battery
compartment. Make sure they are installed in the
correct direction as marked on the inside of the
battery compartment.
4. Once the batteries are installed properly, replace
the cover by sliding it back on from the left.
Important:
Important:
Important: BATTERY REMOVAL
Important:
Important:
If the batteries are removed or fail, the
keypad memory will
Step 2.
Step 2.
Step 2.
Open Safe with Override Key (square top)
Open Safe with Override Key (square top)
Open Safe with Override Key (square top)
Step 2.
Step 2.
Open Safe with Override Key (square top)
Open Safe with Override Key (square top)
You will need access to the inside of the safe door to begin
programming. You must use the Emergency Override Key
(square top) to open the door for the first time.
1. Insert the Emergency Override Key (square top) in the
lock, turn to the left
Important:
Important:
Important:
Important:
Important: TURN OVERRIDE KEY TO LEFT ONLY
When using the Emergency Override Key, you
must
ONLY TURN IT TO THE
ONLY TURN IT TO THE LEFT
ONLY TURN IT TO THE LEFT
ONLY TURN IT TO THE LEFT
ONLY TURN IT TO THE LEFT
to the right may cause key to become stuck in
the cylinder and may cause damage to the lock.
2 2 2 2 2
BATTERY REMOVAL
BATTERY REMOVAL
BATTERY REMOVAL
BATTERY REMOVAL
NOT
NOT
NOT
NOT
NOT
be erased.
left
left (counterclockwise) and pull the door open.
left
left
TURN OVERRIDE KEY TO LEFT ONLY
TURN OVERRIDE KEY TO LEFT ONLY
TURN OVERRIDE KEY TO LEFT ONLY
TURN OVERRIDE KEY TO LEFT ONLY
For best results and
LEFT. Turning it
BATTERY
COMPARTMENT

Advertisement

Table of Contents
loading

This manual is also suitable for:

2054d2084d2118d

Table of Contents