Hardware Installations and Upgrades
6. The sixth drive bay is directly below the tape drive bay in the chassis. Lift the lever at the rear
of the hard drive blank that is installed in the sixth drive bay to remove the blank from the
chassis.
7. Attach the tape drive to the tape drive carrier kit using the four screws that were included with
the tape drive kit. See the figure below.
8. Slide the tape drive carrier with the installed tape drive into the combined tape drive bay / sixth
drive bay until the carrier clicks into place.
Figure 82. Inserting the Tape Drive Carrier into the Chassis
Intel® Server Chassis SR2400/SR2400DC User Guide
Figure 81. Inserting a Tape Drive into the Carrier
TP01356
TP01357
91