Installing The Power Supply; Figure 47. Removing The Power Supply From The Server System - Intel SR1690WB - Server System - 0 MB RAM Service Manual
A guide for technically qualified assemblers of intel identified subassemblies/ products
Hide thumbs
Also See for SR1690WB - Server System - 0 MB RAM:
Table of Contents
Advertisement
1. Disconnect all power supply cables including power at rear of chassis (see letter
"A").
2. Remove the three screws securing the power supply to the back panel (see letter
"B").
Figure 47. Removing the Power Supply from the Server System
3. Lift the power supply up to clear the chassis tab (see letter "C") and remove the
power supply by sliding it out (see letter "D").
Installing the Power Supply
1. Insert the replacement power supply by first engaging the back panel (see letter
"A").
58
B
D
C
®
Intel
Server System SR1690WB Service Guide
A
B
AF003319
Advertisement
Table of Contents
