If the server has an optional RAID adapter installed and you have just installed or
removed a hard disk drive, see the documentation that comes with the RAID
adapter for information about reconfiguring the disk arrays.
If you have just installed a Remote Supervisor Adapter II to manage the server from
a remote location, see the section about setting up the adapter in the IBM Eserver
325 Type 8835 User's Guide and in the Remote Supervisor Adapter User's Guide
for information about setting up and configuring the adapter and using the adapter
to manage the server remotely. The IBM Eserver 325 Type 8835 User's Guide is
on the IBM Eserver Documentation CD. The Remote Supervisor Adapter User's
Guide comes with the adapter.
To configure the integrated Gigabit Ethernet controllers, see the section about
configuring the Gigabit Ethernet controllers at "Configuring the Gigabit Ethernet
controllers" on page 10 and in the User's Guide on the IBM Eserver
Documentation CD.
49
Chapter 4. Installing options