Installing A Security Rope Clip - IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual

Installing a security rope clip

To help prevent theft, you can add a security rope clip and cable to your server.
Complete the following steps to install a rope clip:
1. Remove the side cover (see "Removing the side cover" on page 36).
2. Use a screwdriver to remove the two metal knockouts.
3. Insert the rope clip through the rear panel; then, attach and tighten the nuts.
4. Thread a cable through the rope clip and around an object that is not part of or
5. If you have other options to install or remove, do so now; otherwise, go to
permanently secured to the building structure or foundation and from which the
cable cannot be removed. Fasten the cable ends together with a lock. After you
add the security cable, be certain it does not interfere with other cables
connected to the server.
Rope clip
"Completing the option installation" on page 66.
Chapter 4. Installing options
61