Display Messages - RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual

Display Messages

The following messages show the status of the phone, provides Caller ID information, or
helps you set up and use your phone.
DELETE ALL?
DELETE?
START/END
ENTER NAME
ENTER NUMBER
NEW CALLS
HANDSET NAME
UNAVAILABLE
NO LINE
LINE IN USE
EMPTY
OUT OF RANGE
BLOCKED
UNKNOWN
INCOMPLETE
DATA
44
Prompt asking if you want to erase all records.
Prompt asking if you want to erase the current record.
Indicates that it is the end of the list.
Prompt telling you to enter a name.
Prompt telling you to enter a telephone number.
Indicates call or calls which have not been reviewed.
Prompt telling you to enter a user name for the handset.
Indicates that the function you want to initialize cannot work at that
moment or the function being worked cannot continue. The system is
busy or some other higher priority function is being performed.
For example, the message playback function will be stopped when
there is an incoming call.
Indicates that the telephone line is not connected.
Display on handset while the line is in use.
Indicates there are no CID records in memory.
Indicates handset is too far away from the base, and the handset is
searching for the base.
Indicates the person is calling from a number which is
blocked from transmission.
Indicates incoming call is from an area not serviced by CID or the CID
information was not sent.
Indicates incorrect CID information received.