Memory Full; Changing The Battery; Battery Safety Precautions - RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual

Memory Full

full"
You should erase some messages so the answering system may record new messages.
NOTE: The unit also answers after the 10th ring if it is set to Answer Off. To
access the answering system, enter your 3-digit security code.

Changing the Battery

CAUTION: To reduce the risk of fire or personal injury, use only the Telefield NA Inc.
approved Nickel-metal Hydride (Ni-MH) battery model T -2 734 , which is
compatible with this unit.
1. Make sure the telephone is OFF (not in Talk mode) before you replace battery.
2. Remove the battery compartment door.
3. Disconnect the battery plug from the jack inside the battery compartment and remove
the battery pack from the handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow the handset
battery to properly charge (for 14 hours) prior to first use or when you install a new
battery pack. If you do not properly charge the phone, battery performance will be
compromised .

Battery Safety Precautions

• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic
materials could be released which can cause injury.
• Remove batteries if storing over 30 days.
NO TE: The RBRC seal on the battery used in your Telefield NA Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.
43