Pre-Dialing; Answering A Call; Switching Between The Speakerphone, Handset & Headset Mode - RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual

Pre-Dialing

1. With the phone idle, manually enter the telephone number.
number length is 32 digits, if the number is over 32 digits, it will emit an error tone.
telephone number shows in the display.
2. Press the DIAL Soft key (on base only), Spk button, Talk button (handset only), or line
1 or line 2 button to take a line, or pick up the corded handset (on the base only) and
then the telephone number will be dialed out.

Answering a Call

For cordless handset:
1. Press the Talk button to answer the call in receiver mode,
-OR-
2. Press the Spk button to answer the call in speakerphone mode,
-OR-
3. Press the corresponding LINE Soft key to answer the call in receiver mode.
4. When finished, press end button.
For the base:
1. Pick up the corded handset,
-OR-
2. Press the speaker button to answer the call in speakerphone mode,
-OR-
3. Press the corresponding line button to answer the call in speakerphone mode,
-OR-
4. Press the headset button to answer the call in headset mode.
5. When finished, hang up the corded handset or press Spk button (in speakerphone) or
headset button (in headset mode) to end the call.
NOTE: If you have set the Auto Answer as On in the cordless handset, you can
answer the call directly by picking up this handset from the charger, without
pressing any buttons.
NOTE: Adjust the volume by pressing the vol (- or +) button during a call.
Switching Between the Speakerphone, Handset, and
Headset Mode
Base
To switch to the speakerphone, press speaker button. The speakerphone indicator
illuminates. Place the handset back into the cradle.
To switch to the corded handset, pick up the handset. The speakerphone or headset
indicator will turn off .
The maximum pre-dialing
The
27