Call Back; To Save And Repeat A Number - NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual

CALL BACK

DT730/710 DT330/310
If Called Station is Busy
STEP 1: Press CALL BACK. Receive service set tone.
CALLBACK SET
1:25 PM MON 12 JUL 2010
– Or –
STEP 1: Press the FLASH key and enter "Call Back"
access code.
STEP 2: When both parties become idle, calling par-
ty's phone rings. Calling party would go off
hook and hear ring back tone.
The called station would then be ringing.
CALLBACK
1:25 PM MON 12 JUL 2010
STEP 3: Connection is established when the called
party answers.
CALLBACK
1:25 PM MON 12 JUL 2010
Called party
2000
Called party
2000
Called party
2001
Note: Call Back may be programmed by the Telephony
Server Admin. on a Programmable feature key or
by the user on a One-Touch Speed Calling key.
Using Soft Key
STEP 1: Press CB Soft Key and receive service set
tone.
STEP 2: "CALLBACK SET" is displayed and the CB
Soft Key flashes on the display.
CALLBACK SET
1:25 PM
MIC

TO SAVE AND REPEAT A NUMBER

DT730/710 DT330/310
To Save
Speaker
STEP 1: Press
STEP 2: Dial desired telephone number.
STEP 3: Press S&R. Dialed number is now stored.
S&R LED lights.
– Or –
STEP 3: Receive internal call.
STEP 4: Press S&R. Number is stored in memory.
148
MON 12 JUL 2010
>>>
key.