CONFERENCE
DT730/710 DT330/310
STEP 1: With call in progress, ask party to hold.
STEP 2: Press
Transfer
tone.
STEP 3: Dial desired number.
STEP 4: After call is answered, press
LED lights.
STEP 5: Three-way conference is established.
CONF
1:25 PM
MON 12 JUL 2010
Note:
The Conf key is accommodated on only DTL-2E-
1, ITL-2E-1 and DTL-6DE-1. If using the termi-
nals without
Conf
grammable feature key to which conference
feature has been assigned.
Using Soft Key
STEP 1: With a call in progress, press
dial desired number.
STEP 2: After call is answered, press CONF Soft Key.
Three-way conference is established.
CONF
1:25 PM
MON 12 JUL 2010
MIC
STEP 3: If one party hang up, other two remain con-
key, receive interrupted dial
Conf
key. The
key, use a soft key or pro-
key and
Transfer
>>>
nected. Conf LED goes out.
TO ESTABLISH A BROKER CALL
DT730/710 DT330/310
STEP 1: While engaged in a call and wishing to con-
sult a third party, press
automatically placed on hold.
STEP 2: Dial desired party to consult.
STEP 3: Press
Transfer
Third party is automatically placed on hold.
STEP 4: By repeating these steps, it is possible to al-
ternate between calls.
Note:
The display indicates connected station or trunk
at any given time.
TO ANSWER A CAMPED-ON CALL
DT730/710 DT330/310
STEP 1: While engaged in a call, receive the camp-on
indication (one short tone burst). LED of
Answer
key flashes.
STEP 2: Press
Answer
on hold.
STEP 3: Connection to camped-on call is established.
STEP 4: Press
Answer
Camped-on call is placed on hold.
136
key. Caller is
Transfer
key to return to original caller.
key. Call in progress is placed
key to return to original call.