Conference; To Establish A Broker Call; Call Back (Station) - NEC DT310 User Manual

Conference

Option 1
With call in progress, ask party to hold.
Press Transfer, receive interrupted dial tone.
Dial desired number.
After call is answered, press Conf key. Conf LED
lights.
Three-way conference is established.
CNF 2000
4:26 PM TUE 12 FEB 2008
If one party hangs up, other two remain connected.
Conf LED goes out.
Option 2
With call in progress and third party on hold on
another Line/Trunk key.
Press Conf key, Conf LED flashes.
Press Held Line/Trunk key, Conf LED lights.
Three-way conference is established.
Access to Option 2 is based on software
Note:
revision and data assignment.
2001
37

To Establish a Broker Call

While engaged in a call and wishing to consult a
third party, press Transfer. Caller is automatically
placed on hold.
Dial desired party to consult.
Press Transfer to return to original caller. Third
party is automatically placed on hold.
By repeating these steps, it is possible to alternate
between calls.
The display indicates connected station or
Note:
trunk at any given time.

Call Back (Station)

Lift handset or press Speaker.
Dial desired station number and receive busy tone
or ring back tone.
Press Call Back or dial 2 and receive service set
tone.
Restore handset.
When busy station becomes idle or the station that
did not answer initiates or answers a call or
accesses a feature and then becomes idle, the
setting station is alerted by ring and flashing LED.