Security Mode - NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual

SECURITY MODE

DT730 Series has the Security key which prevents
information leakage from terminal. While the terminal is
locked, Security Lamp lights up.
Security Lamp lights up.
Security lock will be released.
Please input a password.
BK
Note: When the system administrator invalidates
the security mode, this function cannot be
used. For details of the security mode, con-
tact the system administrator.
Note:
While the telephone is locked,
becomes disabled. Also, any features pro-
vided by the telephony server, such as call
origination or call answering, cannot be per-
formed.(The Incoming call cannot be picked
up though "Ringing" or "Voice call" are pos-
sible.)It is necessary to release the security
mode to respond.
DT730
Press Security Key.
Cancel OK
Menu
Note: To make a call of VOICE CALL is available
toward a called party in the Security mode.
When a called party activates the Security
mode with leaving its MIC to ON, the called
party can converse with a calling party
though terminal operation is restricted.
Note: Even when the telephone is reset for any
reason (such as power-off, etc.) while the
telephone is placed in security mode, the
lock is not released.
• TO LOCK THE TELEPHONE
Before placing DT700 Series in Security mode, you can
set a password. For details on the password setting,
see TO CHANGE PASSWORD
Setup.
STEP 1: Press Security key on DT730 Series. The
following message is displayed on LCD.
key
STEP 2: Press
ries in Security mode.
121
in chapter 3 Terminal
Security Lock?
Cancel OK
or OK soft key to place DT700 Se-