Dodge 2007 Sprinter Owner's Manual page 76

i
Do not exceed the maximum permissi-
ble number of seats for passenger
vans.
Removing the rear bench seat
The locking lever is located underneath the
bench seat, on the feet of the bench seat.
1 Lever
Turn all levers 1 for the bench seat
fully upward.
The rear bench seat moves back into
the seat mounting cups on the vehicle
floor.
Lift the rear bench seat upward out of
the seat mounting cups.
Installing the rear bench seat
1 Lever
2 Seat mounting cups
Observe the specified installation loca-
tion for the rear bench seat.
A rear bench seat with 2 seats may
only be installed left-sided.
Check seat mounting cups 2 on the
vehicle floor.
Seat mounting cups 2 must be kept
free from dirt and foreign objects.
Position the rear bench seat in the di-
rection of travel in respective seat
mounting cups 2.
Slide the rear bench seat forward until
you hear the locking mechanisms en-
gage.
Check levers 1 on the bench seat
feet.
All levers 1 must be parallel to the ve-
hicle floor.
Seats
3