Dodge 2007 Sprinter Owner's Manual page 314

Identification lamps 12V 4CP
(cargo vans only)
1 Securing screw
Remove screw 1 and remove the lamp
housing.
Press the bulb into the socket, turn it
counterclockwise and remove it from
the holder.
Press the new bulb into the bulb holder
and screw it in clockwise.
Carefully reattach the lamp housing
and retighten screw 1.
Entry lamp* W 5 W
N82.20-2081-31
1 Lamp housing
2 Bulb holder
3 Cable connector
Press in the latching springs of lamp
housing 1 using a suitable tool, for ex-
ample a screwdriver.
Pry off lamp housing 1.
Remove cable connector 3.
Turn bulb holder 2 in the direction of
the arrow and remove it together with
the bulb.
Changing bulbs
Remove bulb 2 from the bulb holder.
Press the new bulb into bulb holder 2.
Screw bulb holder 2 together with the
bulb into lamp housing 1.
Connect cable connector 3. The con-
nector's locking spring must engage.
Align lamp housing 1 and engage it.
5